Nissan Stanza/200SX/240SX 1982-1992 Repair Guide

Side Oil Seal

Print

REMOVAL & INSTALLATION



See Figures 1, 2 and 3



Click image to see an enlarged view

Fig. Fig. 1: Removing side oil seal



Click image to see an enlarged view

Fig. Fig. 2: Installing side oil seal



Click image to see an enlarged view

Fig. Fig. 3: Checking the final drive unit fluid level

  1. Remove the halfshaft--refer to the necessary service procedures.
  2.  
  3. Remove side flange if so equipped (matchmark for correct installation) using suitable puller.
  4.  
  5. Remove the oil seal.
  6.  

To install:
  1. Apply multi-purpose grease to sealing lips of oil seal. Press oil seal into carrier.
  2.  
  3. Install side flange if so equipped with special tool J39352 or equivalent.
  4.  
  5. Install the halfshaft. Check fluid level.
  6.  

 
label.common.footer.alt.autozoneLogo