Nissan Stanza/200SX/240SX 1982-1992 Repair Guide

Stabilizer Bar

Print

REMOVAL & INSTALLATION



Stanza Wagon 4WD

See Figure 1



Click image to see an enlarged view

Fig. Fig. 1: Stabilizer bar installation - Stanza 4WD

  1. Raise and support the rear of the vehicle on jackstands.
  2.  
  3. Before removing stabilizer retaining bolts, matchmark the brackets. Refer to the illustrations.
  4.  
  5. Remove the bracket retaining bolts. Remove the stabilizer bar.
  6.  
  7. Installation is the reverse of the removal procedure. Make sure the stabilizer retaining brackets are even spaced when installed.
  8.  

 
label.common.footer.alt.autozoneLogo