Nissan Stanza/200SX/240SX 1982-1992 Repair Guide

VACUUM DIAGRAMS

Imprimir

Following are vacuum diagrams for most of the engine and emissions package combinations covered by this guide. Because vacuum circuits will vary based on various engine and vehicle options, always refer first to the vehicle emission control information label, if present. Should the label be missing, or should vehicle be equipped with a different engine from the vehicle's original equipment, refer to the diagrams below for the same or similar configuration.

If you wish to obtain a replacement emissions label, most manufacturers make the labels available for purchase. The labels can usually be ordered from a local dealer.

See Figures 1 through 10





Click image to see an enlarged view

Fig. Fig. 1: Vacuum line and electrical schematic - 200SX Z series engine

 


Click image to see an enlarged view

Fig. Fig. 2: Vacuum line and electrical schematic - 200SX CA20E engine

 


Click image to see an enlarged view

Fig. Fig. 3: Vacuum line and electrical schematic - 200SX CA18ET engine

 


Click image to see an enlarged view

Fig. Fig. 4: Vacuum line and electrical schematic - Stanza CA20 (1982-83) Calif. engine

 


Click image to see an enlarged view

Fig. Fig. 5: Vacuum line and electrical schematic - Stanza CA20 engine

 


Click image to see an enlarged view

Fig. Fig. 6: Vacuum line and electrical schematic - Stanza CA20 (1982-83) high altitude engine

 


Click image to see an enlarged view

Fig. Fig. 7: Vacuum line and electrical schematic - Stanza CA20E (1984 and later) engine

 


Click image to see an enlarged view

Fig. Fig. 8: ECCS system schematic-1988 200SX with VG30E engine

 


Click image to see an enlarged view

Fig. Fig. 9: ECCS fuel flow system schematic-1988 200SX with VG30E engine

 


Click image to see an enlarged view

Fig. Fig. 10: ECCS air flow system schematic-1988 200SX with VG30E engine

 

 
label.common.footer.alt.autozoneLogo