Nissan Titan 2004-06

Removal & Installation

Print



Click image to see an enlarged view

Fig. Removing A/C compressor

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Discharge the refrigerant.
  4.  
  5. Disconnect or remove the following:
    CAUTION
    Cap or wrap the joint of the pipe with suitable material such as vinyl tape to avoid the entry of air.



    Front right wheel and tire assembly
     
    Engine under cover and the splash shield
     
    Engine air cleaner and air ducts
     
    Drive belt
     
    Compressor electrical connector.
     



    High-pressure flexible hose and low-pressure flexible hose from the compressor
     
    Compressor bolts and nut
     

  6.  

To install:

  1. To install, reverse removal procedure.
  2.  
  3. Replace the O-ring of the low-pressure flexible hose and high-pressure flexible hose with a new one, apply compressor oil to them when installing them.
  4.  
  5. After recharging the A/C system with refrigerant, check for leaks.
  6.  

 
label.common.footer.alt.autozoneLogo