Nissan Titan 2004-06

Halfshafts

Print

Removal & Installation





Click image to see an enlarged view

Fig. Front halfshaft

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove or disconnect the following:

    Wheel
     
    Engine splash guard
     
    ABS sensor harness on knuckle
     
    Brake caliper and suspend it aside
     
    Coil spring and shock absorber assembly
     

  4.  
  5. Separate upper ball joint stud from steering knuckle using special tool J-24319-01.
  6.  
  7. Remove or disconnect the following:

    Cotter pin and half shaft nut
     
    Half shaft from front differential
     
    Half shaft from hub and bearing assembly
     

  8.  

To install:

  1. Install or connect the following:

    Half shaft into hub
     
    Halt shaft into front differential
     
    Half shaft nut and tighten to 101 ft. lbs. and replace cotter pin
     
    Upper ball joint to steering knuckle
     
    Coil spring and shock absorber assembly
     
    Brake caliper
     
    ABS sensor
     
    Engine splash guard
     
    Wheel
     

  2.  

 
label.common.footer.alt.autozoneLogo