Nissan Titan 2004-06

Upper Ball Joints

Print

Removal & Installation



  1. Remove or disconnect the following:

    Wheel
     
    Cotter pin and nut from upper ball joint
     

  2.  
  3. Separate upper ball joint from steering knuckle using special tool J-24319-01
  4.  

To install:

  1. Install or connect the following:

    Upper ball joint
     
    New cotter pin and tighten nut to 58 ft. lbs. (79 Nm)
     
    Wheel
     

  2.  

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove or disconnect the following:

    Wheel
     
    Cotter pin and nut from upper ball joint
     

  4.  
  5. Separate upper ball joint from steering knuckle using special tool J-24319-01
  6.  

To install:

  1. Install or connect the following:

    Upper ball joint
     
    New cotter pin and tighten nut to 58 ft. lbs. (79 Nm)
     
    Wheel
     

  2.  

 
label.common.footer.alt.autozoneLogo