Nissan Titan 2004-06

Upper Control Arms

Print

Removal & Installation



  1. Remove or disconnect the following:

    Wheel
     
    Coil spring and shock absorber assembly
     
    Cotter pin and nut from upper ball joint
     

  2.  
  3. Separate upper ball joint stud from steering knuckle using special tool J-24319-01.
  4.  
  5. Remove the following:

    Upper control arm mounting bolts
     
    Upper arm
     

  6.  

To install:

  1. Install or connect the following:

    Upper control arm and tighten bolts to 107 ft. lbs. (145 Nm)
     
    Upper ball joint with new cotter pin and tighten nut to 58 ft. lbs. (79 Nm)
     
    Coil spring and shock absorber assembly
     
    Wheel
     

  2.  

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove or disconnect the following:

    Wheel
     
    Coil spring and shock absorber assembly
     
    Cotter pin and nut from upper ball joint
     

  4.  
  5. Separate upper ball joint stud from steering knuckle using special tool J-24319-01.
  6.  
  7. Remove the following:

    Upper control arm mounting bolts
     
    Upper arm
     

  8.  

To install:

  1. Install or connect the following:

    Upper control arm and tighten bolts to 107 ft. lbs. (145 Nm)
     
    Upper ball joint with new cotter pin and tighten nut to 58 ft. lbs. (79 Nm)
     
    Coil spring and shock absorber assembly
     
    Wheel
     

  2.  

 
label.common.footer.alt.autozoneLogo