Nissan Titan 2004-06

Removal & Installation

Print



Click image to see an enlarged view

Fig. Exploded view of thermostat and components

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Drain the cooling system.
  4.  
  5. Remove or disconnect the following:

    Air duct and resonator assembly
     
    Engine cover
     
    water suction hose from the water inlet
     
    water inlet and thermostat
     

  6.  
  7. To install, reverse removal procedure.
  8.  
  9. Install the thermostat with the whole circumference of each flange part fit securely inside the rubber ring as shown.
  10.  
  11. Install the thermostat with the jiggle valve facing upwards.
  12.  
  13. Check for leaks of the engine coolant.
  14.  
  15. Start and warm up the engine. Visually check for leaks of the engine coolant.

    Click image to see an enlarged view

    Fig. Installing thermostat

  16.  

 
label.common.footer.alt.autozoneLogo