Nissan Titan 2004-06

Removal & Installation

Print

  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Drain the cooling system.
  4.  
  5. Remove or disconnect the following:

    Engine splash guard
     
    Air intake assembly
     
    Accessory drive belt
     

  6.  


NOTE
Leave tensioner pulley in its fixed position.



Water pump pulley
 
Water pump
 



Click image to see an enlarged view

Fig. Water pump mounting

To install:

  1. Install or connect the following:

    Water pump with a new gasket. Tighten bolts to 18 ft. lbs. (25 Nm).
     
    Water pump pulley and tighten bolts to 87 in. lbs. (10 Nm).
     
    Accessory drive belt
     
    Air intake assembly
     
    Engine splash guard
     

  2.  
  3. Refill the cooling system.
  4.  
  5. Start the engine and check for leaks.
  6.  

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Drain the cooling system.
  4.  
  5. Remove or disconnect the following:
    NOTE
    Leave tensioner pulley in its fixed position.



    Engine splash guard
     
    Air intake assembly
     
    Accessory drive belt
     



    Water pump pulley
     
    Water pump

    Click image to see an enlarged view

    Fig. Water pump mounting

     

  6.  

To install:

  1. Install or connect the following:

    Water pump with a new gasket. Tighten bolts to 18 ft. lbs. (25 Nm).
     
    Water pump pulley and tighten bolts to 87 in. lbs. (10 Nm).
     
    Accessory drive belt
     
    Air intake assembly
     
    Engine splash guard
     

  2.  
  3. Refill the cooling system.
  4.  
  5. Start the engine and check for leaks.
  6.  

 
label.common.footer.alt.autozoneLogo