Nissan Z - ZX 1970-1988 Repair Guide

Brake Light Switch

Print

REMOVAL & INSTALLATION



See Figure 1

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the lower instrument cover.
  4.  
  5. Disconnect the electrical connectors from the switch.
  6.  



Click image to see an enlarged view

Fig. Fig. 1: Brake light switch beside steering column-1987 300 ZX shown

  1. Loosen the locknut, rotate the switch and remove it.
  2.  
  3. To install, place the switch into position and install the locknut.
  4.  
  5. Fasten the electrical connectors to the switch.
  6.  
  7. Install the lower instrument cover.
  8.  
  9. Reconnect the negative battery cable.
  10.  

 
label.common.footer.alt.autozoneLogo