Nissan Z - ZX 1970-1988 Repair Guide

Power Brake Booster

Print

REMOVAL & INSTALLATION



  1. Refer to the Master Cylinder removal and installation procedures, in this section and remove the master cylinder.
  2.  
  3. Remove the vacuum hose from the power brake booster.
  4.  
  5. Remove the pushrod from the brake pedal.
  6.  
  7. From under the dashboard, remove the booster-to-cowl nuts and the booster from the vehicle.
  8.  
  9. To install, position the booster to the cowl and install the nuts under the dashboard.
  10.  
  11. Install the pushrod to the brake pedal.
  12.  
  13. Install the vacuum hose to the brake booster.
  14.  
  15. Install the master cylinder as outlined in this section.
  16.  

 
label.common.footer.alt.autozoneLogo