Nissan Z - ZX 1970-1988 Repair Guide

Tachometer

Print

REMOVAL & INSTALLATION



240 Z Models
  1. Remove the heater air duct which passes behind the instruments.
  2.  
  3. Remove the wing nuts and washers which retain the tachometer from behind.
  4.  
  5. Pull the tachometer down slightly, then unfasten the electrical connector.
  6.  
  7. To install, reverse the removal procedures.
  8.  

260 Z and 280 Z Models

  1. Remove the screw, located just above the tachometer face, which retains the tachometer at the top.
  2.  
  3. From under the instrument panel, remove the screw which holds the tachometer to the instrument panel bracket.
  4.  
  5. Pull the tachometer out, and unfasten the instrument harness connector. Fully remove the tachometer.
  6.  
  7. To install, reverse the removal procedures.
  8.  

 
label.common.footer.alt.autozoneLogo