Nissan Z - ZX 1970-1988 Repair Guide

Power Seat Motor

Print

REMOVAL & INSTALLATION



1984-88 Models

See Figure 1

  1. Remove the seat-to-floor mounting bolts (one at each corner).
  2.  
  3. Raise the seat, then disconnect the air hoses and the electrical connectors from the seat.
  4.  
  5. Remove the seat from the vehicle.
  6.  



Click image to see an enlarged view

Fig. Fig. 1: Exploded view of power seat and components-1984-88 models

  1. Remove the motor(s) from the drive mechanism(s).
  2.  
  3. To install, lubricate the drive mechanism(s) and reverse the removal procedures. Tighten the seat mounting bolts to 20-27 ft. lbs. (26-36 Nm).
  4.  

 
label.common.footer.alt.autozoneLogo