Nissan Z - ZX 1970-1988 Repair Guide

Fog Lights

Print

REMOVAL & INSTALLATION



280 ZX Models
  1. Remove the retainer screws from both sides of the fog light.
  2.  
  3. Remove the lens from the light housing and turn over.
  4.  
  5. Unfasten the clips which secure the bulb into the light housing.
  6.  
  7. Remove the bulb and unplug from the harness.
  8.  
  9. Reverse removal procedures to install. Do not touch the glass of the new bulb with your fingers or early bulb failure could occur.
  10.  

300 ZX Models

See Figures 1, 2 and 3



Click image to see an enlarged view

Fig. Fig. 1: Unfasten the harness at the rear of the fog light



Click image to see an enlarged view

Fig. Fig. 2: Twist off the cover to access the bulb



Click image to see an enlarged view

Fig. Fig. 3: Remove the bulb from the lens. Be careful not to touch the glass of the replacement bulb

  1. Access the fog lights from under the front spoiler.
  2.  
  3. Unfasten the harness attached to the rear of the fog light assembly.
  4.  
  5. Twist off the cover from the rear of the lens to access the bulb.
  6.  
  7. Remove the bulb and unplug from the harness.
  8.  
  9. Reverse removal procedures to install. Do not touch the glass of the new bulb with your fingers or early bulb failure could occur.
  10.  

 
label.common.footer.alt.autozoneLogo