Nissan Z - ZX 1970-1988 Repair Guide

Ignition Switch

Print

REMOVAL & INSTALLATION



  1. Disconnect the negative battery cable. Remove the screws holding the shell cover halves together, separate and remove the cover halves.
  2.  
  3. Unfasten the lead wires at the connector located at the bottom of the steering lock.
  4.  
  5. Remove the screw which holds the switch to the steering lock and remove the switch.
  6.  
  7. To install, reverse the removal procedures.
  8.  

 
label.common.footer.alt.autozoneLogo