Odyssey 2007-2008

Wheel Speed Sensors

Print

Removal & Installation



  1. Turn the ignition switch to LOCK (0).
  2.  
  3. Raise and safely support the vehicle.
  4.  
  5. Remove the required wheel.
  6.  
  7. Disconnect the wheel speed sensor connector.
  8.  
  9. Remove the clips, the bolt, and the wheel speed sensor.

    Click image to see an enlarged view

    Fig. View of the front wheel speed sensor



    Click image to see an enlarged view

    Fig. View of the rear wheel speed sensor

  10.  

To install:

  1. Installation is the reverse order of removal.
  2.  
  3. Start the engine, and make sure the ABS and VSA indicators go off.
  4.  
  5. Test-drive the vehicle, and make sure the ABS and VSA indicators do not come on.
  6.  

 
label.common.footer.alt.autozoneLogo