Odyssey 2007-2008

Removal & Installation

Print

Driver-s Side



Specific to:

Honda Odyssey 2007-2008

  1. Remove the driver's dashboard lower cover.
  2.  
  3. Remove the self-tapping screws and the duct.
  4.  
  5. Disconnect the wiring harness from the front air mix control motor. Remove the self-tapping screws and the front air mix control motor from the heater unit.

    Click image to see an enlarged view

    Fig. Disconnect the wiring harness (A) and screws to remove the driver-s side air mix motor

  6.  

To install:

  1. Install the motor in the reverse order of removal. Make sure the pin on the motor is properly engaged with the linkage. After installation, make sure the motor runs smoothly.
  2.  

Passenger-s Side



Specific to:

Honda Odyssey 2007-2008

  1. Remove the glove box housing.
  2.  
  3. Disconnect the wiring harness from the passenger's air mix control motor. Remove the self-tapping screws and the passenger's air mix control motor from the heater unit.

    Click image to see an enlarged view

    Fig. Disconnect the wiring harness (A) and screws to remove the passenger-s side air mix motor

  4.  

To install:

  1. Install the motor in the reverse order of removal. Make sure the pin on the motor is properly engaged with the linkage. After installation, make sure the motor runs smoothly.
  2.  

 
label.common.footer.alt.autozoneLogo