Odyssey 2007-2008

Vehicle Speed Sensor

Print

Removal & Installation



  1. Remove the engine splash shield.
  2.  
  3. Disconnect the output shaft (countershaft) speed sensor connector, and remove the output shaft (countershaft) speed sensor.
  4.  

To install:

  1. Install a new O-ring on a new output shaft (countershaft) speed sensor and apply clean ATF to the O-ring, then install the output shaft (countershaft) speed sensor in the transmission housing.
  2.  
  3. Check the connector for rust, dirt, or oil, then connect the connector securely.
  4.  
  5. Install the engine splash shield.
  6.  

 
label.common.footer.alt.autozoneLogo