Odyssey 2007-2008

Removal & Installation

Print

Sensor 1



Specific to:

Honda Odyssey 2007-2008

  1. Drain the engine coolant.
  2.  
  3. Remove the engine cover.
  4.  
  5. Disconnect the Engine Coolant Temperature (ECT) sensors 1 2P connector.
  6.  
  7. Remove the ECT sensor 1.
  8.  

To install:

  1. Install the parts in the reverse order of removal with a new O-ring (C), then refill the radiator with engine coolant, and bleed air from the cooling system with the heater valve open.
  2.  

Sensor 1 & 2



Specific to:

Honda Odyssey 2007-2008

  1. Disconnect the negative battery cable.
  2.  
  3. Drain the engine cooling system.
  4.  
  5. Remove the engine appearance cover.
  6.  
  7. Disconnect the desired Engine Coolant Temperature (ECT) sensor wiring harness.
  8.  
  9. Remove the desired ECT sensor.
  10.  

To install:

  1. Installation is the reverse order of removal.
  2.  
  3. Refill the engine cooling system to the correct level.
  4.  

Sensor 2



Specific to:

Honda Odyssey 2007-2008

  1. Drain the engine coolant.
  2.  
  3. Remove the engine cover.
  4.  
  5. Disconnect the Engine Coolant Temperature (ECT) sensors 2 2P connector.
  6.  
  7. Remove the ECT sensor 2.
  8.  

To install:

  1. Install the parts in the reverse order of removal with a new O-ring (C), then refill the radiator with engine coolant, and bleed air from the cooling system with the heater valve open.
  2.  

 
label.common.footer.alt.autozoneLogo