Odyssey 2007-2008

Intake Manifold

Print

Removal & Installation



  1. Remove the intake manifold cover.
  2.  
  3. Remove the air inlet duct.
  4.  
  5. Remove the PCV hose and brake booster hose.
  6.  
  7. Remove the EVAP canister hose and water bypass hoses. Plug the bypass hose.
  8.  
  9. Tag and disconnect all wiring connected to the manifold.
  10.  
  11. Remove the upper cover mounting bolts and nuts, in 2 equal steps, in the sequence shown. Remove the cover.

    Click image to see an enlarged view

    Fig. Upper cover loosening sequence-J35A6 and J35A7 engines

  12.  
  13. Remove the intake manifold mounting bolts and nuts, in 2 equal steps, in the sequence shown. Remove the manifold.

    Click image to see an enlarged view

    Fig. Intake manifold loosening sequence-J35A6 and J35A7 engines

  14.  
  15. Installation is the reverse of removal. Tighten the manifold bolts and nuts, in the sequence shown, in 2 equal steps, to 16 ft. lbs. (22 Nm). Tighten the cover bolts and nuts, in the sequence shown, in 2 equal steps, to 105 inch lbs. (12 Nm).

    Click image to see an enlarged view

    Fig. Intake manifold torque sequence-J35A6 and J35A7 engines



    Click image to see an enlarged view

    Fig. Upper cover torque sequence-J35A6 and J35A7 engines



    Click image to see an enlarged view

    Fig. Intake manifold and related parts-J35A6 engine



    Click image to see an enlarged view

    Fig. Intake manifold and related parts-J35A7 engine

  16.  

 
label.common.footer.alt.autozoneLogo