Odyssey 2007-2008

Removal & Installation

Print

  1. Drain the engine cooling system.
  2.  
  3. From under the hood, open the cable clamp, then disconnect the heater valve cable from the heater valve arm.
  4.  
  5. Loosen the hose clamps and remove the heater water control valve.

    Click image to see an enlarged view

    Fig. Open the cable clamp (A), then disconnect the heater valve cable (B) from the heater valve arm (C)

  6.  

To install:

  1. Installation is the reverse order of removal.
  2.  
  3. Refill the cooling system to the correct level.
  4.  

 
label.common.footer.alt.autozoneLogo