Odyssey 2007-2008

Wheel Bearings

Print

Adjustment



Specific to:

Honda Odyssey 2007-2008

The wheel bearings are not adjustable. If they are not within specification, the wheel bearings must be replaced.

Removal & Installation



Specific to:

Honda Odyssey 2007-2008

  1. Raise and safely support the vehicle.
  2.  
  3. Remove the rear wheel.
  4.  
  5. Remove the brake caliper bracket mounting bolts, then remove the caliper assembly from the knuckle.
    WARNING
    To prevent damage to the caliper assembly or the brake hose, use a short piece of wire to hang the caliper from the undercarriage. Do not twist the brake hose excessively.

  6.  
  7. Remove the brake rotor.
  8.  
  9. Remove the hub bearing unit and the O-ring.
  10.  

To install:

Click image to see an enlarged view

Fig. Install the hub bearing unit (A) with a new O-ring (B)

  1. Installation is the reverse order of removal. Tighten the hub mounting bolts to 72 ft. lbs. (98 Nm).
  2.  

 
label.common.footer.alt.autozoneLogo