Odyssey 2007-2008

Removal & Installation

Print

  1. Make sure the ignition switch is in LOCK (0).
  2.  
  3. Remove the glove box housing.
  4.  
  5. Disconnect the wiring harness from the recirculation control motor. Remove the self-tapping screws and the recirculation control motor from the blower unit.

    Click image to see an enlarged view

    Fig. Disconnect the wiring harness (A) from the recirculation control motor (B) to remove

  6.  

To install:

  1. Install the motor in the reverse order of removal. Make sure the pin on the motor is properly engaged with the linkage. After installation, make sure the motor runs smoothly.
  2.  

 
label.common.footer.alt.autozoneLogo