Odyssey 2007-2008

Removal & Installation

Print

  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Drain the cooling system.
  4.  
  5. Remove or disconnect the following:

    Negative battery cable
     
    Accessory drive belts
     
    Front cover
     
    Timing belt. Refer to the timing belt procedure.
     
    Timing belt tensioner
     
    Water pump

    Click image to see an enlarged view

    Fig. Water pump mounting

     

  6.  

To install:

  1. Install or connect the following:

    Water pump. Use a new O-ring seal and tighten the bolts to 105 inch lbs. (12 Nm).
     
    Timing belt tensioner
     
    Timing belt
     
    Front cover
     
    Accessory drive belts
     
    Negative battery cable
     

  2.  
  3. Refill the cooling system to the correct level.
  4.  
  5. Start the engine and check for leaks.
  6.  

 
label.common.footer.alt.autozoneLogo