PT Cruiser, 2001 - 2005

Oil Pressure Sender

Print

Removal & Installation



  1. Raise and safely support the vehicle.
  2.  
  3. Position oil collecting container under pressure switch location.
  4.  
  5. Disconnect oil pressure switch electrical connector and remove switch

    Click image to see an enlarged view

    Fig. Location of the oil pressure sensor

  6.  

To install:

  1. Install oil pressure switch and connect electrical connector.
  2.  
  3. Carefully lower the vehicle.
  4.  
  5. Start engine and allow to run a minimum of 2 minutes.
  6.  
  7. Shut engine off and check engine oil level. Adjust level as necessary.
  8.  

 
AutoZone Logo