PT Cruiser 2006-2007

Instrument Panel

Print

Removal & Installation



Instrument Panel
  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the negative battery cable.
  4.  
  5. Remove or disconnect the following:

    The left and right A pillar trim moldings using a trim stick
     
    The front power window switch
     
    The center bezel retaining screw
     
    The Heating, Ventilation, and Air Conditioning (HVAC) control knobs
     
    The center bezel using a trim stick
     
    The top cover retaining screws and pull it rearward to remove
     
    The HVAC control unit from the instrument panel
     
    The retaining screws from the upper and lower steering column shrouds
     
    The left lower instrument panel bezel
     
    The steering column wire connectors
     
    The steering column
     
    The brake pedal support bracket
     
    The left side instrument panel end cap from the wiring connectors
     
    The rear power window switch from the console and pull the parking handle all the way up
     
    The auxiliary power outlet wire connector
     
    The center console
     
    The glove box assembly
     
    The right side instrument panel end cap
     
    The 5 right side instrument panel wire connectors
     
    The instrument panel from the vehicle, with the help of an assistant
     

  6.  

To install:

  1. Install or connect the following:

    The instrument panel into the vehicle
     
    The right side instrument panel wire connectors
     
    The right side instrument panel end cap
     
    The glove box assembly
     
    The center console
     
    The auxiliary power outlet wire connector
     
    The rear power window switch
     
    The left side instrument panel end cap
     
    The left side wire connectors
     
    The brake pedal support bracket
     
    The steering column with a new pinch bolt
     
    The steering column wire connectors
     
    The left lower instrument panel bezel
     
    The HVAC control unit
     
    The center bezel
     
    The front power window switch
     
    The left and right A pillar trim moldings
     
    The negative battery cable
     

  2.  
  3. Start the vehicle and verify proper system operations.
  4.  
  5. Road test the vehicle and check for any rattles, repair if necessary.
  6.  

 
label.common.footer.alt.autozoneLogo