Pacifica, 2003-2005

Evaporative Emission Control System

Print

Evaporative Emission Purge Solenoid



Removal & Installation
  1. Disconnect the negative battery cable.
  2.  
  3. Unlock and disconnect the electrical connector.
  4.  
  5. Release tab and pull solenoid from bracket.
  6.  
  7. Remove the vacuum lines from solenoid.
  8.  

To Install:

  1. Connect the vacuum lines to solenoid.
  2.  
  3. Install solenoid to bracket.
  4.  
  5. Connect the electrical connector to the solenoid and lock.
  6.  
  7. Connect the negative battery cable.

    Click image to see an enlarged view

    Fig.

  8.  

 
label.common.footer.alt.autozoneLogo