Pacifica, 2003-2005

Speed Control Switch Connectors

Print

Removal & Installation



  1. Disconnect the negative battery cable.
  2.  
  3. Remove the Driver side airbag.
  4.  
  5. Remove the speed control switch mounting screw.
  6.  
  7. Disconnect the electrical connector from switch.
  8.  
  9. Remove switch.

    Click image to see an enlarged view

    Fig.

  10.  

To Install:

  1. Connect the electrical connector to switch.
  2.  
  3. Install switch.
  4.  
  5. Install the speed control switch mounting screw.
  6.  
  7. Tighten Screw.
  8.  
  9. Install the Driver side Airbag.
  10.  
  11. Connect the negative battery cable.
  12.  

 
label.common.footer.alt.autozoneLogo