Pacifica, 2003-2005

Removal & Installation

Print

Ignition Coil Capacitor



  1. Disconnect the negative battery cable.
  2.  
  3. Remove the electrical connector from capacitor.
  4.  
  5. Remove the bolt from capacitor.
  6.  
  7. Remove the capacitor.

    Click image to see an enlarged view

    Fig. Exploded view of the ignition coil capacitor

    Exploded view of the ignition coil capacitor
  8.  

To install:

  1. Install the bolt to capacitor. Make sure that the ground strap is in place.
  2.  
  3. Tighten the bolt securely.
  4.  
  5. Install the electrical connector to capacitor.
  6.  
  7. Connect the negative battery cable.
  8.  

 
label.common.footer.alt.autozoneLogo