Pacifica, 2003-2005

Rear Main Seal

Print

Removal & Installation



3.8L Engine
  1. Before servicing the vehicle, refer to the precautions at the beginning of this section.
  2.  
  3. Remove or disconnect the following:

    Negative battery cable
     
    Transaxle
     
    Flexplate
     
    Rear main seal
     

  4.  

To install:

  1. Place seal guide tool 6926-1 on the crankshaft and place the seal over the tool. Make sure the lip of the seal is facing towards the crankcase.
  2.  
  3. Install or connect the following:

    Rear main seal flush with the cylinder block surface using the tools illustrated.
     
    Flexplate
     
    Transaxle
     
    Negative battery cable
     

  4.  
  5. Run the engine and check for leaks.

    Click image to see an enlarged view

    Fig. Install the rear main seal flush with the cylinder block surface-3.8L engines

    Install the rear main seal flush with the cylinder block surface-3.8L engines
  6.  

 
label.common.footer.alt.autozoneLogo