Pacifica, 2003-2005

Brake Caliper

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove or disconnect the following:

    Negative battery cable
     
    Front wheels
     
    Banjo bolt retaining the brake hose to the caliper. Be sure to plug the end of the brake hose or cover it with a plastic bag to prevent contamination from entering the hydraulic system.

    Click image to see an enlarged view

    Fig. Exploded view of the banjo bolt and related components

    Exploded view of the banjo bolt and related components

    Click image to see an enlarged view

    Fig. Exploded view of the caliper and adapter mounting

    Exploded view of the caliper and adapter mounting
     

  4.  
  5. Place a C-clamp over the caliper as illustrated, place a screw drive head against the outboard pad and hook against the rear of the caliper. Slowly tighten the screw drive and retract the caliper pistons into their bores and breaking the outboard brake pad from the caliper fingers.

    Click image to see an enlarged view

    Fig. Place a C-clamp over the caliper as illustrated

    Place a C-clamp over the caliper as illustrated
  6.  
  7. Once the pad is free, slide the caliper in on the guides to provide clearance between the rotor and inboard pad.
  8.  
  9. Place an appropriate prytool through the center opening in the top of the caliper behind the inboard pad between the pistons using care not to contact the piston boots. Pry the pad to free it from the pistons.
  10.  
  11. Remove the two caliper guide pin bolts and caliper.
  12.  

To install:

  1. Completely compress the caliper pistons
  2.  
  3. Install or connect the following:

    Caliper and align the guide pin bolt holes with the guide pins. Install the pin bolts and tighten to 32 ft. lbs. (43 Nm).
     
    Banjo bolt with new washers on each side of the hose fitting and tighten to 35 ft. lbs. (47 Nm)
     
    Wheels
     
    Negative battery cable
     

  4.  
  5. Bleed the brake system and road test the vehicle.
  6.  

 
label.common.footer.alt.autozoneLogo