Pacifica 2006-2008

Oil Pressure Sensor

Print

Removal & Installation



  1. Raise vehicle on hoist.
  2.  
  3. Position an oil collecting container under sensor/switch location.
  4.  
  5. Disconnect electrical connector.
  6.  
  7. Unscrew oil pressure sensor/switch from oil filter adapter.
  8.  

To install:

  1. Apply thread sealant to the sensor/switch threads.
  2.  
  3. Install oil pressure sensor/switch to fitting.
  4.  
  5. Connect electrical connector.
  6.  
  7. Lower vehicle.
  8.  
  9. Start engine and check for leaks.
  10.  
  11. Check engine oil level and adjust as necessary.
  12.  

 
label.common.footer.alt.autozoneLogo