Pacifica 2006-2008

Multi-Function (Combination) Switch

Print

Removal & Installataion



  1. Disconnect and isolate the battery negative cable.
  2.  
  3. Remove the lower steering column shroud.
  4.  
  5. Remove the upper steering column shroud.
  6.  
  7. Disconnect the instrument panel wire harness connector from the switch.
  8.  
  9. Remove the two screws that secure the left multi-function switch to the housing.
  10.  
  11. Remove the left multi-function switch from column and vehicle.
  12.  

To install:

  1. Position the left multi-function switch onto the housing.
  2.  
  3. Install the two screws to the left multi-function switch.
  4.  
  5. Reconnect the instrument panel wire harness connector to the switch.
  6.  
  7. Install the lower steering column shroud.
  8.  
  9. Install the upper steering column shroud.
  10.  
  11. Reconnect the battery negative cable.
  12.  

 
label.common.footer.alt.autozoneLogo