Pickup 1997

Fluid Fill Procedure

Print

  1. Before servicing the vehicle, refer to the Precautions Section.
    NOTE
    If working near and/or around the SRS system and components, be sure to disable the SRS system. After disabling the system wait three minutes or more before servicing the vehicle. Disconnect the air bag module connector.



    Click image to see an enlarged view

    Fig. Air bag module connector location

  2.  
  3. Disconnect the negative battery cable.
  4.  
  5. The fluid in the reservoir tank should be between MAX and MIN.

    Click image to see an enlarged view

    Fig. Brake master cylinder markings

  6.  
  7. Add fluid as required to bring the fluid level to specification.
  8.  
  9. Be sure to use the proper grade and type fluid.
  10.  
  11. Using the CONSULT-III diagnostic tool, or equivalent, perform the SRS self diagnostic test and any reconnect/relearn procedures, as required.
  12.  

 
label.common.footer.alt.autozoneLogo