Pickup 1997

Driveshaft

Print

Removal & Installation



Front Driveshaft

Specific to:

Nissan Pickup 1996-1997

At this time the manufacturer does not provide removal and installation procedures for this component, refer to the illustration as required. Before servicing the vehicle, refer to the Precautions Section.


NOTE
If working near and/or around the SRS system and components, be sure to disable the SRS system. After disabling the system wait three minutes or more before servicing the vehicle. Disconnect the air bag module connector. Disconnect the negative battery cable. Once repair work is completed, use the CONSULT-III diagnostic tool, or equivalent, perform the SRS self diagnostic test and any reconnect/relearn procedures, as required.



Click image to see an enlarged view

Fig. Air bag module connector location



Click image to see an enlarged view

Fig. Front driveshaft and related components

Be sure to matchmark the component before removal. Be sure to plug any openings to prevent fluid loss.

Rear Driveshaft

Specific to:

Nissan Pickup 1996-1997

At this time the manufacturer does not provide removal and installation procedures for this component, refer to the illustration as required. Before servicing the vehicle, refer to the Precautions Section.


NOTE
If working near and/or around the SRS system and components, be sure to disable the SRS system. After disabling the system wait three minutes or more before servicing the vehicle. Disconnect the air bag module connector. Disconnect the negative battery cable. Once repair work is completed, use the CONSULT-III diagnostic tool, or equivalent, perform the SRS self diagnostic test and any reconnect/relearn procedures, as required.



Click image to see an enlarged view

Fig. Air bag module connector location



Click image to see an enlarged view

Fig. Rear driveshaft and related components-model 2S80B



Click image to see an enlarged view

Fig. Rear driveshaft and related components-model 3S80B



Click image to see an enlarged view

Fig. Rear driveshaft and related components-model 3S71A

Be sure to matchmark the component before removal. Be sure to plug any openings to prevent fluid loss.

 
label.common.footer.alt.autozoneLogo