Pickup 1997

Sunroof

Print

Power Sunroof



Removal & Installation

At this time the manufacturer does not provide removal and installation procedures for this component. The following procedure is a guideline and may differ from the vehicle you are servicing.

  1. Before servicing the vehicle, refer to the Precautions Section.
    NOTE
    If working near and/or around the SRS system and components, be sure to disable the SRS system. After disabling the system wait three minutes or more before servicing the vehicle. Disconnect the air bag module connector.



    Click image to see an enlarged view

    Fig. Air bag module connector location

  2.  
  3. Disconnect the negative battery cable.
  4.  
  5. Remove the headliner, as required.

    Click image to see an enlarged view

    Fig. Interior roof trim and related components-regular cab



    Click image to see an enlarged view

    Fig. Interior roof trim and related components-king cab

  6.  
  7. Remove the component from its mounting.

    Click image to see an enlarged view

    Fig. Sunroof and related components

  8.  

To install:


NOTE
Be sure to use new fasteners, as required.

  1. Installation is the reverse of the removal procedure.
  2.  
  3. Using the CONSULT-III diagnostic tool, or equivalent, perform the SRS self diagnostic test and any reconnect/relearn procedures, as required.
  4.  

 
label.common.footer.alt.autozoneLogo