Pickup 1997



Specific to:

Nissan Pickup 1996-1997

All models utilize a crank angle sensor in the distributor. This sensor is used to provide engine position information to the Electronic Control Unit (ECU). The ECU regulates ignition timing electronically, therefore no vacuum or centrifugal advance is used. Also, because of the ECU control, no periodic service adjustments are necessary. However, if timing or idle speed problems are suspected a combined ignition timing and idle speed inspection procedure is provided.

No periodic timing settings should be required by these vehicles. Also, always refer to the instructions or specifications found on the Vehicle Emission Control Information (VECI) label for additional information which is applicable to your particular vehicle.