Pickup 1997

Window Systems

Print

Power Windows



Removal & Installation
Motor & Regulator

Specific to:

Nissan Pickup 1996-1997

At this time the manufacturer does not provide removal and installation procedures for this component, refer to the illustration as required. Before servicing the vehicle, refer to the Precautions Section.


CAUTION
Use caution as the door glass may have to be removed. Realignment will be required upon installation.


CAUTION
When separating the motor from the regulator use extreme caution as this component may be under pressure and personal injury may result, as you remove the bolts and separate the components.


NOTE
If working near and/or around the SRS system and components, be sure to disable the SRS system. After disabling the system wait three minutes or more before servicing the vehicle. Disconnect the air bag module connector. Disconnect the negative battery cable. Once repair work is completed, use the CONSULT-III diagnostic tool, or equivalent, perform the SRS self diagnostic test and any reconnect/relearn procedures, as required.



Click image to see an enlarged view

Fig. Air bag module connector location



Click image to see an enlarged view

Fig. Door panel and related components-regular cab



Click image to see an enlarged view

Fig. Door panel and related components-king cab



Click image to see an enlarged view

Fig. Power window motor and related components

Switch

Specific to:

Nissan Pickup 1996-1997

At this time the manufacturer does not provide removal and installation procedures for this component, refer to the illustration as required.

Click image to see an enlarged view

Fig. Power window switch location

 
label.common.footer.alt.autozoneLogo