Pickup 1997

Axle Housing

Print

Removal & Installation



At this time the manufacturer does not provide removal and installation procedures for this component, refer to the illustrations as required. Before servicing the vehicle, refer to the Precautions Section.


NOTE
If working near and/or around the SRS system and components, be sure to disable the SRS system. After disabling the system wait three minutes or more before servicing the vehicle. Disconnect the air bag module connector. Disconnect the negative battery cable. Once repair work is completed, use the CONSULT-III diagnostic tool, or equivalent, perform the SRS self diagnostic test and any reconnect/relearn procedures, as required.



Click image to see an enlarged view

Fig. Air bag module connector location



Click image to see an enlarged view

Fig. Rear differential and related components



Click image to see an enlarged view

Fig. Rear drive axle exploded view-H190A axle



Click image to see an enlarged view

Fig. Rear drive axle exploded view-C200 axle



Click image to see an enlarged view

Fig. Rear drive axle exploded view-H233B axle

 
label.common.footer.alt.autozoneLogo