Pilot 2006-2008

Precautions

Print

  1. Disconnecting the negative battery cable may interfere with the functions of the on board computer systems and may require the computer to undergo a relearning process, once the negative battery cable is reconnected.
    NOTE
    The power window reset procedure must be performed when disconnecting the battery, removing the No. 1 (20 amp) fuse in the passenger-s under dash fuse/relay box, disconnecting the 18P connector from the power window control unit, removing the window regulator, glass or glass run channel and disconnecting the driver-s door wire harness.

  2.  
  3. Turn the ignition switch OFF.
  4.  
  5. Turn the ignition switch ON (II).
  6.  
  7. Move the driver-s power window all the way down by holding the driver-s power window switch firmly down to the second detent. When the window reaches the bottom, hold the driver-s power window switch in the AUTO DOWN position for two seconds.
  8.  
  9. Move the driver-s power window all the way up without stopping by holding the driver-s power window switch firmly up to the second detent. When the window reaches the top, hold the driver-s power window switch in the AUTO UP position for two seconds.
    NOTE
    If the power window does not work in AUTO, repeat the procedure.

  10.  

 
label.common.footer.alt.autozoneLogo