Pontiac Fiero 1984-1988 Repair Guide

Adjustments

Print

TRANSAXLE CONTROL CABLE



  1. Disconnect the negative (-) battery cable.
  2.  
  3. Place the shift lever in N (neutral) position.
  4.  
  5. Place the transaxle lever in the Neutral position by rotating the transaxle lever clockwise from Park through Reverse into Neutral.
  6.  
  7. Insert a threaded pin (part of shift cable assembly) upward through the slotted hole in the lever and hand start the nut. The lever must be held out of Park when torquing the nut. Torque the nut to 15-25 ft. lbs. (20-34 Nm).
  8.  

 
label.common.footer.alt.autozoneLogo