Pontiac Fiero 1984-1988 Repair Guide

Blower Motor and Cage

Print

REMOVAL & INSTALLATION





Click image to see an enlarged view

Fig. Fig. 1 Exploded view of the heater control module used on models not equipped with A/C



Click image to see an enlarged view

Fig. Fig. 2 Exploded view of the heater and A/C module



Click image to see an enlarged view

Fig. Fig. 3 Disengage the blower motor electrical connection



Click image to see an enlarged view

Fig. Fig. 4 Remove the blower motor retainers ...



Click image to see an enlarged view

Fig. Fig. 5 ... then remove the blower motor and cage

  1. Disconnect the negative (-) battery cable.
  2.  
  3. Remove the cooling tube.
  4.  
  5. Disconnect electrical connections from the blower switch and ground.
  6.  
  7. Remove the five blower motor retaining screws and remove the blower and cage assembly.
  8.  

To install:

  1. Position the motor and cage assembly into the heater housing. Tighten the five retaining screws. Reconnect the switch and ground connectors. Connect the negative battery cable and check for proper operation.
  2.  

 
label.common.footer.alt.autozoneLogo