Pontiac Fiero 1984-1988 Repair Guide

Center Mounted Stop Light

Print

REMOVAL & INSTALLATION





Click image to see an enlarged view

Fig. Fig. 1 Remove the center mounted stop light cover to access the bulb assemblies



Click image to see an enlarged view

Fig. Fig. 2 Open the engine compartment hood and use a prytool to remove the black tabs on the sill



Click image to see an enlarged view

Fig. Fig. 3 Use a screwdriver to unfasten the lens retainers ...



Click image to see an enlarged view

Fig. Fig. 4 ... then remove the lens retaining screws



Click image to see an enlarged view

Fig. Fig. 5 Pull the lens assembly forward



Click image to see an enlarged view

Fig. Fig. 6 Twist the bulb socket to the left and disengage it from the lens assembly



Click image to see an enlarged view

Fig. Fig. 7 Remove the bulb from the socket by turning it counterclockwise

A center mounted stop light has been installed on later model vehicles to aid in stop lamp illumination. This light can be serviced from inside the vehicle. To remove the bulb; unscrew the two cover screws, remove the cover, light sockets and replace the two bulbs.

 
label.common.footer.alt.autozoneLogo