Pontiac Fiero 1984-1988 Repair Guide

Parking Brake Lamp Switch

Print

The parking brake switch is bolted to the hand brake mounting bracket and is actuated by the parking brake hand lever. The switch is non-adjustable.

REMOVAL & INSTALLATION





Click image to see an enlarged view

Fig. Fig. 1 The parking brake lamp switch (1) is bolted to the hand brake mounting bracket

  1. Remove the retainer holding the brake boot to the handle.
  2.  
  3. Remove the carpet trim finish molding.
  4.  
  5. Disconnect the switch electrical connector.
  6.  
  7. Remove the switch retaining bolt and switch.
  8.  
  9. Installation is the reverse of removal.
  10.  

 
label.common.footer.alt.autozoneLogo