Pontiac Fiero 1984-1988 Repair Guide

Wiper Arm

Print

REMOVAL & INSTALLATION





Click image to see an enlarged view

Fig. Fig. 1 Use tool J-8966 or its equivalent to disengage the wiper arm from the retaining locking clip



Click image to see an enlarged view

Fig. Fig. 2 Bosch® wiper blade and fit kit



Click image to see an enlarged view

Fig. Fig. 3 Lexor® wiper blade and fit kit



Click image to see an enlarged view

Fig. Fig. 4 Pylon® wiper blade and adaptor



Click image to see an enlarged view

Fig. Fig. 5 Trico® wiper blade and fit kit



Click image to see an enlarged view

Fig. Fig. 6 Tripledge® wiper blade and fit kit



Click image to see an enlarged view

Fig. Fig. 7 To remove and install a Lexor® wiper blade refill, slip out the old insert and slide in a new one



Click image to see an enlarged view

Fig. Fig. 8 On Pylon® inserts, the clip at the end has to be removed prior to sliding the insert off



Click image to see an enlarged view

Fig. Fig. 9 On Trico® wiper blades, the tab at the end of the blade must be turned up ...



Click image to see an enlarged view

Fig. Fig. 10 ... then the insert can be removed. After installing the replacement insert, bend the tab back



Click image to see an enlarged view

Fig. Fig. 11 The Tripledge® wiper blade insert is removed and installed using a securing clip



Click image to see an enlarged view

Fig. Fig. 12 Trico® wiper blade insert (element) replacement

The wiper arms are retained on the serrated transmission spindle by an integral locking clip. Carefully lift up on the wiper arm using Tool J-8966 or equivalent. Installation is the reverse of removal.

 
label.common.footer.alt.autozoneLogo