Protege 1999-2000

Alternator

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove or disconnect the following:

    Negative battery cable
     
    Electrical connectors from the alternator
     
    Alternator drive belt
     
    Alternator pivot and adjusting bar bolts
     
    Alternator
     

  4.  

To install:

  1. Install or connect the following:

    Alternator with the pivot bolt
     
    Alternator electrical connectors
     
    Drive belt
     
    Upper mounting bolt
     

  2.  
  3. Adjust the belt tension. Torque the lower through bolt to 28-38 ft. lbs. (38-51 Nm) and the upper mounting bolt to 14-18 ft. lbs. (19-26 Nm).

    Negative battery cable
     

  4.  

 
label.common.footer.alt.autozoneLogo