Protege 1999-2000

Flywheel

Print

Removal & Installation



  1. Remove the transaxle.
  2.  
  3. Remove the clutch and pressure plate.
  4.  
  5. Hold the flywheel with the tool illustrated.
  6.  
  7. Loosen the bolts in the sequence shown.
  8.  

To install:

  1. Installation is the reverse of removal.
  2.  
  3. Tighten the bolts in a criss-cross pattern. Tighten the bolts to 71-75 ft. lbs. (97-102 Nm).

    Click image to see an enlarged view

    Fig. Hold the flywheel with the tool illustrated-Protégé

  4.  
  5. Remove the transaxle.
  6.  
  7. Remove the clutch and pressure plate.
  8.  
  9. Hold the flywheel with the tool illustrated.
  10.  
  11. Loosen the bolts in a criss-cross pattern.
  12.  

To install:

  1. Installation is the reverse of removal.
  2.  
  3. Tighten the bolts in a criss-cross pattern. Tighten the bolts to 80-85 ft. lbs. (108-116 Nm).

    Click image to see an enlarged view

    Fig. Hold the flywheel with the tool illustrated-Mazda 3

  4.  

 
label.common.footer.alt.autozoneLogo