Protege 1999-2000

Fuel Pump

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Relieve the fuel pressure.
  4.  
  5. Remove or disconnect the following:

    Negative battery cable
     
    Rear seat cushion
     
    Fuel pump/sending unit electrical connector
     
    Fuel pump/sending unit access cover
     
    Fuel supply and return hoses from the fuel pump/sending unit
     
    Fuel pump/sending unit from the fuel tank
     
    Sending unit electrical connector
     
    Sending unit from the fuel pump assembly
     

  6.  

To install:

  1. Install or connect the following:

    Sending unit to the fuel pump assembly
     
    Sending unit electrical connector
     
    Fuel pump/sending unit into the fuel tank with a new gasket
     
    Fuel supply and return lines
     
    Access cover
     
    Sending unit electrical connector
     
    Rear seat cushion
     
    Negative battery cable
     

  2.  
  3. Start the engine and check fuel leaks.
  4.  

 
label.common.footer.alt.autozoneLogo