Protege 1999-2000

Brake Shoes

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove or disconnect the following:

    Wheel and the brake drum
     
    ABS speed sensor, if equipped
     
    Parking brake cable from the backside of the brake backing plate
     
    Upper return spring
     
    Hold pin and the spring from the lower shoe (leading side)
     
    Lower return spring and the anti-rattle spring and shoe from the lower shoe (leading side)
     
    Hold pin and spring and remove the upper brake shoe (trailing side)
     

  4.  

To install:

  1. Install or connect the following:

    Upper (trailing side) brake shoe to the operating lever and then to the wheel cylinder and backing plate
     
    Brake shoe hold spring and hold pin
     
    Anti-rattle spring
     
    Lower return spring to both brake shoes
     
    Leading side brake shoe to the operating lever and then to the wheel cylinder and anchor plate
     
    Hold spring and hold pin to the leading side brake shoe
     
    Upper return spring
     
    Brake drum
     
    ABS speed sensor, if equipped
     
    Wheels and adjust the brakes
     

  2.  

 
label.common.footer.alt.autozoneLogo