Protege 1999-2000

Removal & Installation

Print

  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Disconnect the negative battery cable.
    CAUTION
    After disconnecting the battery, wait for more than 1 minute for the SAS to deplete its stored energy.

  4.  
  5. Place the wheel in the straight-ahead position and turn the ignition switch to LOCK.
  6.  
  7. Remove the SAS module and the steering wheel by removing or disconnecting the following:

    Cover clips at both sides of the steering wheel
     
    Steering wheel-to-SAS module bolts
     
    SAS module from the steering wheel and disconnect the electrical connector
     
    Steering wheel-to-column nut
     
    Steering wheel from the steering column using a suitable puller

    Click image to see an enlarged view

    Fig. Exploded view of the SAS module and the steering wheel assembly-Protégé

     

  8.  

To install:

  1. Install the SAS module and the steering wheel by installing or connecting the following:

    Steering wheel-to-column nut
     
    SAS module from the steering wheel and connect the electrical connector
     
    Steering wheel-to-SAS module bolts
     
    Cover clips at both sides of the steering wheel
     

  2.  
  3. Connect the negative battery cable.
  4.  

 
label.common.footer.alt.autozoneLogo